A small commercial tower on the marina strip, with two co-working floors open to the public.
A small commercial tower on the marina strip — one main tenant across the upper floors, with two co-working floors open to the public at street level.
Column-free floor plates and full-height glazing to the water, on the same heavy-steel structure we use for housing.
- Style
- Cyprus Modern
- Type
- Commercial
- Role
- Developer & main contractor
- Units
- 9 floors, 2 open to the public
- Internal area
- 4,200 m²
- Plot
- 1,100 m²
- Delivery
- Q2 2029 (est.)
The heavy-steel frame and the VAN wall are identical in every concept. Only the outer 10 mm changes — plaster, mouldings, columns or stone.
Heavy steel carries the loads. Around it, one wall in layers: the LSTK frame sets the geometry, hat profiles stiffen it, and monolithic foam concrete fills the cavity — cast between the insulation board outside and the cement board inside, which stays in place as permanent formwork.
- 01 Cement board — CSP 12.5 mm Permanent formwork
- 02 Hat profile — 25 mm 25 mm Interior reinforcement
- 03 LSTK frame + VAN Foamcrete 75–200 mm VAN C-profile 75–200 mm, S350GD · services in the wall · monolithic fill
- 04 Hat profile — 25 mm 25 mm Exterior reinforcement
- 05 XPS / mineral wool 80 mm 80 mm Stays in the finished wall
- 06 Decorative stone 10 mm Façade finish
302 mm in total — 302–327 mm depending on the profile
